2010 Chrysler Town & Country Owner Manual - Page 36

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • On vehicles equipped with the optional Electronic Vehicle Information Center (EVIC), refer to "Electronic Vehicle Information Center (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for further information. 5. Within 30 seconds, press the driver's door lock switch in the UNLOCK direction. 6. A single chime will sound to indicate the feature has been changed. 2 7. To reactivate this feature, repeat the above steps. • On vehicles not equipped with the optional EVIC perform the following steps: 8. If a chime is not heard, the program mode was canceled before the feature could be changed. If neces1. Enter your vehicle and close all doors. sary, repeat the previous procedure. 2. Fasten your seat belt. (Fastening the seat belt will The Unlock Doors Automatically On Exit feature can be cancel any chimes that may be confusing during this reactivated by repeating the above mentioned procedure programming procedure.) or by performing the procedure in the EVIC, Customer3. Insert the Key Fob into the ignition switch. Programmable Features on vehicles so equipped. 4. Within 15-seconds, cycle the ignition Key Fob from the NOTE: Use the Lock Doors Automatically at 15 mph LOCK position to the ON/RUN position a minimum of (24 km/h) and Unlock Doors Automatically On Exit five times ending in the ON position (do not start the features in accordance with local laws. engine).