2010 Chrysler Town & Country Owner Manual - Page 157

156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Press and release the memory SET (S) button located Customer-Programmable FeaturesЉ in "Understanding on the driver's door. A chime will sound signaling that Your Instrument Panel" for further information. you are in the memory set mode. Easy Entry/Exit Seat (Available with Memory Seat 4. Within five seconds, press and release MEMORY ONLY) button 1 on the driver's door. A chime will sound This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the signaling to you that the driver memory has been set. vehicle. 5. Within five seconds, press and release the UNLOCK button on the RKE transmitter. A chime will sound The distance the driver seat moves depends on where signaling to you that the RKE transmitter link has been you have the driver seat positioned when you remove the key from the ignition switch. successfully disabled. To disable another RKE transmitter linked to either • When you remove the key from the ignition switch, the driver seat will move about 2.4 in (60 mm) Memory Position, repeat Steps 1 to 5 for each RKE rearward if the driver seat position is greater than or transmitter. equal to 2.7 in (67.7 mm) forward of the rear stop. The NOTE: Once programmed, all RKE transmitters linked seat will return to its previously set position when you to memory can be easily enabled or disabled at one time. insert the key into the ignition switch and turn it out of Refer to "Electronic Vehicle Information Center (EVIC)/ the LOCK position.