2010 Chrysler Town & Country Owner Manual - Page 29
2010 Chrysler Town & Country Manual
Page 29 highlights
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Enter Remote Start Mode Press and release the REMOTE START button on the RKE transmitter twice within five seconds. The vehicle doors will lock, parking lights will flash and horn will chirp twice (if programmed). Then, the engine will start and the vehicle will remain in the Remote Start mode for a 15-minute cycle. • The engine can be started two consecutive 15-minute cycles with the RKE transmitter. However, the ignition switch must be turned to the ON position before you can repeat the start sequence. To Enter the Vehicle After Remote Start To enter the vehicle while the engine is running during a Remote Start, you must first unlock the vehicle using the UNLOCK button on the transmitter. After the vehicle is unlocked, you can enter the vehicle, insert the Key Fob NOTE: • If your power door locks were unlocked, Remote Start into the ignition switch and move it to the ON position, will automatically lock the doors. otherwise the engine will shut off at the end of 15- minute cycle. • The park lights will turn on and remain on during To Exit Remote Start Mode and Drive the Vehicle Remote Start mode. Before the end of the 15-minute cycle, press and release • For security, power window and power sunroof opthe UNLOCK button on the RKE transmitter to unlock eration (if equipped) are disabled when the vehicle is the doors and disarm the Vehicle Security Alarm (if in the Remote Start mode.