2010 Chrysler Town & Country Owner Manual - Page 485

484 MAINTAINING YOUR VEHICLE 5. Replace the bulb, reinstall the socket, and reattach the lamp assembly. Center High-Mounted Stop Lamp (CHMSL) The CHMSL uses LED lamps that are not serviceable separately. The CHMSL must be replaced as an assembly, see your authorized dealer. License Lamp The license plate lamp is located under the tailgate light bar and above the license plate. Bulb Location 1 - Stop, Tail, Turn Signal Bulb Combo 2 - Backup Bulb 1. Using a small screwdriver, press inward the locking tab on the outboard side of the lamp assembly and pull down on the lamp assembly for removal. 2. Twist and remove the socket from the lamp assembly 3. Twist the socket and remove it from the lamp assem- and pull the bulb out to remove. bly. 3. Push the bulb into the socket, twist the socket into the 4. Pull the bulb to remove it from the socket. lamp assembly and reinstall the lamp assembly into place ensuring the locking tab is secure.