2010 Chrysler Town & Country Owner Manual - Page 315

314 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: • It is not necessary to move the temperature settings for 1. Press the AUTO button on the Front Upper ATC Panel cold or hot vehicles. The system automatically adjusts and the word AUTO will illuminate in the front ATC the temperature, mode and fan speed to provide display, along with three temperatures for driver, front comfort as quickly as possible. passenger, and rear seats. The system will then automati• The temperature can be displayed in English or Metric cally regulate the amount of airflow. units by selecting the "Display Units of Measure in" 2. Next, adjust the temperature you would like the customer-programmable feature. Refer to the "Elecsystem to maintain, by adjusting the driver, front passentronic Vehicle Information Center (EVIC) - Customerger, and rear seat rotary temperature knobs. Once the Programmable Features" in this Section. desired temperature is displayed, the system will achieve To provide you with maximum comfort in the automatic and automatically maintain that comfort level. mode, during cold start-ups, the blower fan will remain 3. When the system is set up for your comfort level, it is on low and the DELAY symbol will appear in the front not necessary to change the settings. You will experience ATC display, until the engine warms up. The fan will the greatest efficiency by simply allowing the system to engage immediately if the DEFROST mode is selected, or function automatically. by pressing the Front Upper ATC Panel blower rocker button and setting the fan to any fixed blower speed. Automatic Operation