2010 Chrysler Town & Country Owner Manual - Page 168

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 2. Rotate the headlight switch counterclockwise to the NOTE: Broken, muddy or obstructed headlights and taillights of vehicles in the field of view will cause AUTO (A) position. headlights to remain on longer (closer to the vehicle). 3. Push the multifunction lever away from you to switch Also, dirt, film and other obstructions on the windshield the headlights to the high beam position. Refer to "Mulor camera lens will cause the system to function tifunction Lever" in this section for further information. improperly. NOTE: This system will not activate until the vehicle is WINDSHIELD WIPERS AND WASHERS at, or above, 25 mph (40 km/h). The wipers and washers are operated by a switch within To Deactivate the multifunction lever. Rotate the end of the multifuncPerform either of the following steps to deactivate the tion lever to select the desired wiper speed. SmartBeam™ system. 1. Pull the multifunction lever toward you to switch the headlights from the high beam to the low beam position. 2. Rotate the headlight switch clockwise from the AUTO (A) to the on position. 3