2010 Chrysler Town & Country Owner Manual - Page 241

240 UNDERSTANDING YOUR INSTRUMENT PANEL 14. Electronic Stability Program (ESP) Indicator Light 17. Front Fog Light Indicator - If Equipped This indicator will illuminate when the front fog / Traction Control System (TCS) Indicator Light lights are on. If this indicator light flashes during acceleration, apply as little throttle as possible. While 18. Seat Belt Reminder Light driving, ease up on the accelerator. Adapt your When the ignition switch is first turned ON, this speed and driving to the prevailing road conlight will turn on for five to eight seconds as a bulb ditions, and do not switch off the Electronic Stability check. During the bulb check, if the driver's seat Program (ESP), or Traction Control System (TCS). belt is unbuckled, a chime will sound. After the bulb 15. Tachometer check or when driving, if the driver's seat belt remains The red segments indicate the maximum permissible unbuckled, the Seat Belt Reminder Light will illuminate engine revolutions per minute (RPM x 1000) for each gear and the chime will sound. Refer to "Occupant Restraints" range. Before reaching the red area, ease up on the in "Things To Know Before Starting Your Vehicle" for accelerator. further information. 16. High Beam Indicator 19. Malfunction Indicator Light (MIL) This indicator shows that the high beam headThe Malfunction Indicator Light (MIL) is part of lights are on. Push the multifunction lever forward an onboard diagnostic system, called OBD, that to switch the headlights to high beam, and pull toward monitors engine and automatic transmission conyourself (normal position) to return to low beam. trol systems. The light will illuminate when the key is in