2010 Chrysler Town & Country Owner Manual - Page 26
2010 Chrysler Town & Country Manual
Page 26 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 • For vehicles not equipped with the EVIC, perform the NOTE: Pressing the LOCK button on the RKE transmitfollowing steps: ter while you are in the vehicle will activate the Vehicle Security Alarm. Opening a door with the Vehicle Security 1. Perform this operation while standing outside the Alarm activated will cause the alarm to sound. Press the vehicle. UNLOCK button to deactivate the Vehicle Security 2. Press and hold the UNLOCK button on a programmed Alarm. RKE transmitter for at least 4 seconds, but no longer than The following table explains the Lamp Flash options. 10 seconds. Then, press and hold the LOCK button while Which Turn Number of still holding the UNLOCK button. Function Signal Lamps Flashes 3. Release both buttons at the same time. Lock All 1 Left Side 2 4. Test the feature while outside of the vehicle by press- Unlock 1st Press ing the LOCK/UNLOCK buttons on the RKE transmitter Unlock All Doors All 2 with the ignition switch in the LOCK position and the Left Side Left Side 2 Key Fob removed. Right Side Right Side 2 All 2 5. Repeat these steps if you want to return this feature to Liftgate its previous setting. Programming Additional Transmitters If you do not have a programmed RKE transmitter, contact your authorized dealer for details. 2