2010 Chrysler Town & Country Owner Manual - Page 234

UNDERSTANDING YOUR INSTRUMENT PANEL 233 INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when If the light remains lit with the engine running, your vehicle will usually be drivable; however, see an authothe ignition switch is in the ON position. rized dealer for service as soon as possible. If the light is 2. Low Fuel Light flashing when the engine is running, immediate service is When the fuel level reaches approximately 2.0 gal required and you may experience reduced performance, (7.8 L) this light will turn on, and remain on until an elevated/rough idle or engine stall and your vehicle fuel is added. may require towing. 3. Electronic Throttle Control (ETC) Light 4. Charging System Light This light informs you of a problem with the This light shows the status of the electrical chargElectronic Throttle Control (ETC) system. The ing system. The light should come on when the light will come on when the ignition is first ignition switch is first turned ON and remain on briefly turned ON and remain on briefly as a bulb as a bulb check. If the light stays on or comes on while check. If the light does not come on during starting, have driving, turn off some of the vehicle's non-essential the system checked by an authorized dealer. electrical devices or increase engine speed (if at idle). If If a problem is detected, the light will come on while the the charging system light remains on, it means that the engine is running. Cycle the ignition key when the vehicle has completely stopped and the shift lever is placed in the PARK position, the light should turn off. 4