2007 Infiniti M35 Owner's Manual - Page 280
2007 Infiniti M35 Manual
Page 280 highlights
POWER STEERING 1. Firmly apply the parking brake. 2. Move the selector lever to the P (Park) position. 3. To help prevent the vehicle from rolling into the street when parked on a sloping drive way, it is a good practice to turn the wheels as illustrated. 1 HEADED DOWNHILL WITH CURB: k BRAKE SYSTEM BRAKING PRECAUTIONS The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at two wheels. You may feel a small click and hear a sound when the brake pedal is fully depressed slowly. This is not a malfunction and means the brake assist mechanism is operating properly. Vacuum assisted brakes The brake booster aids braking by using engine vacuum. If the engine stops, you can stop the vehicle by depressing the brake pedal. However, greater foot pressure on the brake pedal will be required to stop the vehicle and the stopping distance will be longer. Wet brakes When the vehicle is washed or driven through water, the brakes may get wet. As a result, your braking distance will be longer and the vehicle may pull to one side during braking. To dry brakes, drive the vehicle at a safe speed while lightly tapping the brake pedal to heat-up the brakes. Do this until WARNING If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be much harder to operate. The power assisted steering uses a hydraulic pump, driven by the engine, to assist steering. If the engine stops or the drive belt breaks, you will still have control of the vehicle. However, much greater steering effort is needed, especially in sharp turns or at low speeds. Turn the wheels into the curb and move the vehicle forward until the curb side wheel gently touches the curb. 2 HEADED UPHILL WITH CURB: k Turn the wheels away from the curb and move the vehicle back until the curb side wheel gently touches the curb. HEADED UPHILL OR DOWNHILL, NO 3 CURB: k Turn the wheels toward the side of the road so the vehicle will move away from the center of the road if it moves. 4. Push the ignition switch to the LOCK position. 5-46 Starting and driving