2010 Nissan Rogue Owner's Manual - Page 127

Lockout protection When the power door lock switch (driver or front passenger) is moved to the lock position with the key in the ignition switch or the Intelligent Key in the vehicle and any door open, all doors will lock and unlock automatically. This function helps to prevent the keys from being accidentally locked inside the vehicle. . switch to the position (UNLOCK) for more than 5 seconds. To change AUTO LOCK settings: push and hold the power door lock switch to position (LOCK) for more than the 5 seconds. AUTOMATIC DOOR LOCKS . SPA2300 4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once. 5. The ignition must be placed in the OFF and ON position again between each setting change. All doors will be locked automatically when the vehicle speed reaches 15 MPH (24 km/h). All doors will be unlocked automatically when the ignition switch is turned to the ACC position. LOCKING WITH POWER DOOR LOCK SWITCH Operating the power door lock switch will lock or unlock all the doors. The switches are located on the driver's and front passenger's door armrests. To lock the doors, push the power door lock 1 switch to the lock position * with the driver's or front passenger's door open, then close the door. When locking the door this way, be sure not to leave the key inside the vehicle. To unlock the doors, push the power door lock 2 switch to the unlock position * . . The automatic lock and unlock functions can be deactivated or activated independently of each other. To deactivate or activate the automatic lock or unlock system, perform the following procedure. 1. Close all doors. 2. Turn the ignition switch to the ON position. 3. Do one of the following within 20 seconds of performing step 2. . To change AUTO UNLOCK settings: push and hold the power door lock Pre-driving checks and adjustments 3-5