2010 Nissan Rogue Owner's Manual - Page 287

Wheel nut tightening torque: 80 ft-lb (108 N·m) The wheel nuts must be kept tightened to the specification at all times. It is recommended that wheel nuts be tightened to the specification at each tire rotation interval. WARNING . SDI1662 . CHANGING WHEELS AND TIRES Tire rotation NISSAN recommends rotating the tires every 7,500 miles (12,000 km). (See "FLAT TIRE" in the "6. In case of emergency" section for tire replacing procedures.) As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. . . After rotating the tires, check and adjust the tire pressure. Retighten the wheel nuts when the vehicle has been driven for 600 miles (1,000 km) (also in cases of a flat tire, etc.). Do not include the spare tire or any other small size spare tire in the tire rotation. For additional information regarding tires, refer to "Important Tire Safety Information" (US) or "Tire Safety Information" (Canada) in the Warranty Information Booklet. SDI1663 1. Wear indicator 2. Wear indicator location mark Tire wear and damage WARNING . . Tires should be periodically inspected for wear, cracking, bulging or objects caught in the tread. If excessive wear, cracks, bulging or deep cuts are found, the tire(s) should be replaced. The original tires have built-in tread wear indicators. When Maintenance and do-it-yourself 8-37