2010 Nissan Rogue Owner's Manual - Page 284

5. Three-digit code: Date of Manufacture 6. Four numbers represent the week and load rating as the factory installed tire. 6 * Term of "tubeless" or "tube type" year the tire was built. For example, the numbers 3103 means the 31st week of 2003. If these numbers are missing, then look on the other sidewall of the tire. 3 * Tire ply composition and material Indicates whether the tire requires an inner tube ("tube type") or not ("tubeless"). 7 * The word "radial" SDI1607 Example 2 * TIN (Tire Identification Number) for a The number of layers or plies of rubber-coated fabric in the tire. Tire manufacturers also must indicate the materials in the tire, which include steel, nylon, polyester, and others. 4 * Maximum The word "radial" is shown, if the tire has radial structure. 8 * Manufacturer or brand name Manufacturer or brand name is shown. Other tire-related terminology: In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears white lettering or bears manufacturer, brand and/or model name molding that is higher or deeper than the same molding on the other sidewall of the tire, or (2) the outward facing sidewall of an asymmetrical tire that has a particular side that must always face outward when mounted on a vehicle. new tire (example: DOT XX XX XXX XXXX) 1. DOT: Abbreviation for the "Department of Transportation". The symbol can be placed above, below or to the left or right of the Tire Identification Number. cation mark 3. Two-digit code: Tire size permissible inflation pressure This number is the greatest amount of air pressure that should be put in the tire. Do not exceed the maximum permissible inflation pressure. This number indicates the maximum load in kilograms and pounds that can be carried by the tire. When replacing the tires on the vehicle, always use a tire that has the same 2. Two-digit code: Manufacturer's identifi- 5 * Maximum load rating 4. Three-digit code: Tire type code (Op- tional) 8-34 Maintenance and do-it-yourself