2010 Nissan Rogue Owner's Manual - Page 282

tion shown on the Tire and Loading Information label. 5. Add air to the tire as needed. If too much air is added, press the core of the valve stem briefly with the tip of the gauge stem to release pressure. Recheck the pressure and add or release air as needed. 6. Install the valve stem cap. 7. Check the pressure of all other tires, including the spare. SDI1949 Checking the tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto COLD TIRE INFLATION PRESSURE P215/70230 kPa, FRONT R16 99H 33 PSI ORIGINAL P225/60230 kPa, TIRE R17 98H 33 PSI P215/70230 kPa, REAR R16 99H 33 PSI ORIGINAL P225/60230 kPa, TIRE R17 98H 33 PSI 230 kPa, Original tire 33 PSI SPARE TIRE 420 kPa, T155/9060 PSI D16 SIZE the valve stem. Do not press too hard or force the valve stem sideways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove the gauge. 4. Read the tire pressure on the gauge stem and compare it to the specifica8-32 Maintenance and do-it-yourself