2010 Nissan Rogue Owner's Manual - Page 264

DRIVE BELTS JUMP STARTING If jump starting is necessary, see "JUMP STARTING" in the "6. In case of emergency" section. If the engine does not start by jump starting, the battery may have to be replaced. Contact a NISSAN dealer. SDI1480C SDI2090 1. Remove the cell plugs A *. 2. Add distilled water up to the UPPER LEVEL 1 * line. If the side of the battery is not clear, check the distilled water level by looking directly 1 above the cell; the condition * indicates 2 OK and the conditions * needs more to be added. 3. Tighten cell plugs A *. 1. 2. 3. 4. 5. Alternator Water pump Drive belt auto-tensioner Crankshaft pulley Air conditioner compressor WARNING Be sure the ignition switch is in the OFF or LOCK position before servicing drive belts. The engine could rotate unexpectedly. 1. Visually inspect each belt for signs of unusual wear, cuts, fraying or looseness. If the belt is in poor condition or loose, have it Vehicles operated in high temperatures or under severe conditions require frequent checks of the battery fluid level. 8-14 Maintenance and do-it-yourself