2010 Nissan Rogue Owner's Manual - Page 98

HEADLIGHT SWITCH Lighting . has been pushed to the OFF position. When the headlight switch remains in the or position after the lights automatically turn off, the lights will turn on when the ignition switch is pushed to the ON position. * 1 2 * Turn the switch to the position: The front park, side marker, tail, license plate and instrument lights will come on. Turn the switch to the position: Headlights will come on and all the other lights remain on. CAUTION . When you turn on the headlight switch again after the lights automatically turn off, the lights will not turn off automatically. Be sure to turn the light switch to the OFF position when you leave the vehicle for extended periods of time, otherwise the battery will be discharged. Never leave the light switch on when the engine is not running for extended periods of time even if the headlights turn off automatically. SIC3484 Headlight beam select 1 * 2 * To select the low beam, put the lever in the neutral position as shown. To select the high beam, push the lever forward while the switch is in the position. Pull it back to select the low beam. Pulling the lever toward you will flash the headlight high beam even when the headlight switch is in the OFF position. When the headlight switch is in the or position while the ignition switch is in the ON position, the lights will automatically turn off 5 minutes after the ignition switch . 3 * Battery saver system . 2-26 Instruments and controls