2010 Nissan Rogue Owner's Manual - Page 211

CRUISE CONTROL PRECAUTIONS ON CRUISE CONTROL . If the cruise control system malfunctions, it will cancel automatically. The SET indicator light on the meter panel will then blink to warn the driver. If the engine coolant temperature becomes excessively high, the cruise control system will cancel automatically. If the SET indicator light blinks, turn the cruise control main switch off and have the system checked by a NISSAN dealer. The SET indicator light may blink when the cruise control main switch is turned ON while pushing the RESUME/ACCELERATE, SET/COAST or CANCEL switch. To properly set the cruise control system, perform the following procedures. SSD0668 . . on slippery roads (rain, snow, ice, etc.) in very windy areas Doing so could cause a loss of vehicle control and result in an accident. . . . 1. 2. 3. 4. RESUME/ACCELERATE switch SET/COAST switch CANCEL switch MAIN (ON·OFF) switch CRUISE CONTROL OPERATIONS The cruise control allows driving at a speed between 25 to 89 MPH (40 to 144 km/h) without keeping your foot on the accelerator pedal. To turn on the cruise control, push the MAIN switch on. The CRUISE indicator light will illuminate. To set cruising speed, accelerate the vehicle to the desired speed, push the SET/COAST Starting and driving 5-19 WARNING Do not use the cruise control when driving under the following conditions: . when it is not possible to keep the vehicle at a set speed . . in heavy traffic or in traffic that varies in speed on winding or hilly roads