2010 Nissan Rogue Owner's Manual - Page 50
2010 Nissan Rogue Manual
Page 50 highlights
SSS0100 Rear-facing - step 2 SSS0654 Rear-facing - step 3 SSS0655 Rear-facing Follow these steps to install a rear-facing child restraint using the vehicle seat belt in the rear seat: 1. Child restraints for infants must be used in the rear-facing direction and therefore must not be used in the front seat. Position the child restraint on the seat. Always follow the restraint manufacturer's instructions. 2. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer's instructions for belt routing. 3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode). It reverts to the Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted. 1-34 Safety - Seats, seat belts and supplemental restraint system