2010 Nissan Rogue Owner's Manual - Page 232

than 2 times, until they are tight. 4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence as illustrated. Lower the vehicle completely. tened to specifications at each lubrication interval. . Adjust tire pressure to the COLD pressure. . WARNING Always make sure that the spare tire and jacking equipment are properly secured after use. Such items can become dangerous projectiles in an accident or sudden stop. The T-type spare tire and small size spare tire are designed for emergency use. See specific instructions under the heading "WHEELS AND TIRES" in the "8. Maintenance and do-it-yourself" section. COLD pressure: After the vehicle has been parked for three hours or more or driven less than 1 mile (1.6 km). COLD tire pressures are shown on the Tire and Loading Information label affixed to the driver side center pillar. . WARNING . Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose or come off. This could cause an accident. Do not use oil or grease on the wheel studs or nuts. This could cause the nuts to become loose. Retighten the wheel nuts when the vehicle has been driven for 600 miles (1,000 km) (also in cases of a flat tire, etc.). . As soon as possible, tighten the wheel nuts to the specified torque with a torque wrench. Wheel nut tightening torque: 80 ft-lb (108 N·m) The wheel nuts must be kept tightened to specification at all times. It is recommended that wheel nuts be tigh- . Stowing the damaged tire and the tools 1. Securely store the damaged tire, jack and tools in the storage area. 2. Replace the luggage floor box. 3. Replace the lids on the luggage side boxes. 4. Remove the strap from the lift gate opening and store it to the original place. Close the luggage floor board. 5. Replace the cargo cover (if so equipped). 6. Close the lift gate. . 6-8 In case of emergency