2010 Nissan Rogue Owner's Manual - Page 136

When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch (driver's or front passenA B ger's) * or lift gate request switch * within the range of operation. When you lock or unlock the doors, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation. For details, see "Setting hazard indicator and horn mode" later in this section. while any door is open. *3: Doors will not lock with the request switch when the Intelligent Key is left inside the vehicle. However, when an Intelligent Key is inside the vehicle, doors can be locked with another registered Intelligent Key. During this 1-minute time period, if the UNLOCK button on the Intelligent Key is pushed, all doors will be locked automatically after another 1 minute. Unlocking doors Locking doors 1. Turn the ignition switch to the LOCK position.*1 2. Carry the Intelligent Key with you. 3. Close all the doors.*2 4. Push the door handle request switch (driA ver's or front passenger's) * or the lift B gate request switch * while carrying the Intelligent Key with you.*3 5. All the doors and the lift gate will lock. 6. The hazard indicator flashes twice and the outside chime sounds twice. *1: Doors will lock with the request switch while the ignition switch is in the ACC or ON position. *2: Doors will not lock with the request switch A 1. Push the door handle request switch * or B the lift gate request switch * while carrying the Intelligent Key with you. 2. The hazard indicator flashes once and outside chime sounds once. The corresponding door or the lift gate will unlock. 3. Push the request switch again within 5 seconds. 4. The hazard indicator flashes once and outside chime sounds once again. All the doors and the lift gate will unlock. All doors will be locked automatically unless one of the following operations is performed within 1 minute after pushing the request switch while the doors are locked...Opening any doors. Pushing the ignition switch. Inserting the mechanical key into the ignition switch. 3-14 Pre-driving checks and adjustments