2010 Nissan Rogue Owner's Manual - Page 203
2010 Nissan Rogue Manual
Page 203 highlights
CONTINUOUSLY VARIABLE TRANSMISSION (CVT) The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the selector lever is moved to the P (Park) position. . When turning the ignition switch to the LOCK position, make sure that the selector lever is in the P (Park) position. When removing the key from the ignition switch (if it is inserted), make sure that the selector lever is in the P (Park) position. 1 The OFF position * is between the LOCK and ACC positions, although it is not marked on the ignition switch. START (4) The engine starter activates and the engine will start. The ignition switch, when released, will automatically turn to the ON position. KEY POSITIONS LOCK (0) Except for the Intelligent Key equipped model: The key can only be removed from the ignition switch at this position. For the Intelligent Key equipped model: PUSH OFF The ignition switch is locked at this position. PUSH ON The ignition switch will be unlocked while carrying the Intelligent Key. CAUTION As soon as the engine has started, release the ignition switch immediately. . When the ignition switch cannot be turned to the LOCK position: 1. Move the selector lever to the P (Park) position. 2. Turn the ignition switch slightly in the ON direction. 3. Turn the ignition switch to the LOCK position. 4. Remove the key, if it is inserted in the ignition switch. If the ignition switch is turned to the LOCK position, the selector lever cannot be moved from the P (Park) position. The selector lever can be moved if the ignition switch is in the ON position with the foot brake pedal depressed. OFF (1) The power supply is turned off. ACC (2) The electrical accessory power activates without the engine turned on. ON (3) The ignition system and the electrical accessory power activate without the engine turned on. Starting and driving 5-11