3Com 3C17304 Getting Started Guide - Page 21
Rack-mounting, CAUTION
View all 3Com 3C17304 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Rack-mounting 21 ■ The air is as free from dust as possible. ■ The switch is situated away from sources of conductive (electrical) dust, for example, laser printers. ■ The unit is installed in a clean, air conditioned environment. ■ The AC supply used by the switch is separate to that used by units that generate high levels of AC noise, for example, air-conditioning units and laser printers. ■ No more than eight Switch units are placed on top of one another, if the units are free-standing. Rack-mounting The Switch 4200 Series are 1U high and will fit in most standard 19-inch racks. CAUTION: Disconnect all cables from the Switch before continuing. Remove all self adhesive pads from the underside of the Switch if they have been fitted. To rack-mount your Switch: 1 Place the Switch the right way up on a hard flat surface, with the front facing towards you. 2 Locate a mounting bracket over the mounting holes on one side of the Switch, as shown in Figure 5.