3Com 3C17304 Getting Started Guide - Page 29
Gigabit Ethernet connection. - switch 4228g
View all 3Com 3C17304 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Figure 7 Inserting a GBIC Transceiver GBIC Operation 29 erstack 3 Switch 4228G GBIC Ports GBIC Transceiver 3 The transceiver connects to the network using a duplex SC connector. Attach a male duplex SC connector on the network cable into the duplex SC connector on the transceiver. 4 Connect the other end of the cable to a device fitted with an appropriate Gigabit Ethernet connection. 5 Check the LEDs on the front of the Switch to ensure that it is operating correctly. Refer to "LEDs" on page 15 for more information.
GBIC Operation
29
Figure 7
Inserting a GBIC Transceiver
3
The transceiver connects to the network using a duplex SC connector.
Attach a male duplex SC connector on the network cable into the duplex
SC connector on the transceiver.
4
Connect the other end of the cable to a device fitted with an appropriate
Gigabit Ethernet connection.
5
Check the LEDs on the front of the Switch to ensure that it is operating
correctly. Refer to
“LEDs”
on
page 15
for more information.
GBIC Ports
GBIC
Transceiver
erstack 3 Switch 4228G