3Ware 9550SXU-12 User Guide - Page 178
To verify a unit through 3DM, Management > Maintenance, Unit Maintenance, Verify Unit, Stop Verify
UPC - 693494970128
View all 3Ware 9550SXU-12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Maintaining Units To verify a unit through 3DM 1 In 3DM, choose Management > Maintenance. 2 In the Unit Maintenance section of the Maintenance page, select the unit you want to verify and click Verify Unit. 3DM puts the selected unit in verifying mode. If Basic Verify is selected on the Scheduling page, the verification process begins almost immediately. If Advanced Verify is selected, the unit will not start actively verifying until the next scheduled time. A Stop Verify link appears next to the unit on the Maintenance page. If you need to stop the verify process, use this link. (If initialization starts because the unit had not previously been initialized, it cannot be halted, so no Stop Verify link appears.) To verify a unit through 3BM 1 At the main 3BM screen, select the unit by highlighting it and pressing Enter. An asterisk appears in the left-most column to indicate that it is selected. 2 Tab to the Maintain Unit button and press Enter. 3 On the pop-up menu, select Verify and press Enter. Verification of the selected unit starts immediately. Figure 66. Verifying a Unit 166 3ware SAS/SATA RAID Software User Guide, Version 9.5.1