3Ware 9550SXU-12 User Guide - Page 94

3DM 2 (3ware Disk Manager) Introduction To set or change the password 1 Click 3DM 2 Settings on the 3DM menu bar. 2 On the 3DM 2 Settings page, in the Password section, select the type of password you want to change: User or Administrator. 3 Type the current password in the Current Password field. If you are changing the password for the first time, the factory-set default password is 3ware. 4 Enter the new password in the New Password field and again in the Confirm New Password field. 5 Click the Change Password button to enact the change. Note: If you forget your password, you can uninstall 3DM and then reinstall it. This will reset the password to the default password, 3ware. Managing E-mail Event Notification 3DM can notify you when the 3ware RAID controller requires attention, such as when a disk unit becomes degraded and is no longer fault tolerant. E-mail event notification can only occur while 3DM is running, so it is recommended that the 3DM process be left running in the background on the system that contains the 3ware RAID controller. When events occur, notification can be e-mailed to one or more recipients. You can specify the type of events for which notifications will be sent by selecting the severity: • Information will send e-mails for all events • Warning will send e-mail for events with severity of Warning and Error. • Error will send e-mail for events with severity of Error only. Events are listed on the 3DM Alarms page. Event notification can be set up during 3DM installation, and can be changed on the 3DM 2 Settings page. Note: If you are using VMware, you will need to configure the VMware firewall to allow outgoing email, as all ports are blocked by default. See "Configuring the VMware Firewall to Allow Email Notification" on page 83 82 3ware SAS/SATA RAID Software User Guide, Version 9.5.1