Adaptec 2410SA User Guide - Page 105
Creating a RAID 0, devices 0:02:0 and 0:03:0 using 100 MB of available space from each
UPC - 760884142103
View all Adaptec 2410SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Command Line Interface (CLI) Creating a RAID 0 When creating a RAID 0, you need to determine the stripe size that is most suitable for your environment. The stripe size attribute indicates the number of bytes in a stripe, the amount of data written to a segment before the I/O data stream switches to the next segment in the array. The stripe size can be 16, 32, or 64 KB. The default stripe size is 64 KB. Note that you can use the container reconfigure command at a later time to change the stripe size. To create a RAID 0, use the container create stripe command. In the following example, the Array 0 is created on device 0:01:0 from 100 MB of available space. The array's cache is enabled, and the label Mars. AAC0> container create stripe /cache=TRUE /label=Mars ((0,01,0), 100M) Executing: container create stripe /cache=TRUE /label="Mars" ((CHANNEL=0,ID=1,LUN=0),104,857,600 ) container 0 created Creating a RAID 1 To create a RAID 1, use the container create new_mirror command. In the following example, a RAID 1 is created on devices 0:02:0 and 0:03:0 using 100 MB of available space from each device. AAC0> container create new_mirror ((0,2,0), 100M) (0,3,0) Executing: container create new_mirror ((CHANNEL=0,ID=2,LUN=0),104,857,600 ) (CHANNEL=0,ID=3,LUN=0) Creating a RAID 5 When you create a RAID 5, you use a form of redundancy called parity. When you set up parity, the parity stripes are initialized, by default, using a scrub switch (/scrub=TRUE). Parity is set up in the background, and the disks are available immediately. Linux/UNIX only: The /scrub switch is not available in Linux. For Linux, the RAID 5 is always created by building. C-6