Adaptec 2410SA User Guide - Page 18
Array Migration, Drive Enclosures, Hot Spares, Multiple Arrays, SATA Disk Hot Plug - multiple drive failure
UPC - 760884142103
View all Adaptec 2410SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Introduction I Multiple Arrays-Create multiple arrays from a single set of drives. I SATA Disk Hot Plug-You can add and remove disks without shutting down your system. Array Migration The Adaptec 2410SA controller supports modifying existing arrays by expansion, migration from one array type to another, and changing the stripe size, as described by the table below. Current Array Type RAID 0 RAID 1 RAID 5 RAID 10 New Array Type RAID 5 or 10 RAID 0 or 5 or 10 RAID 0 or 10 RAID 0 or 5 To modify an array, refer to the Adaptec Storage Manager-Browser Edition online Help. Windows supports Online Capacity Expansion (OCE). That is, on completion of an array expansion, the additional capacity can be used without restarting the system. Refer to your operating system documentation for instructions on using the additional capacity. Drive Enclosures The Adaptec 2410SA controller supports drive enclosures that include either SES or SAF-TE enclosure management hardware per the Serial ATA II, Phase 1 specification. Hot Spares A hot spare is a drive that is reserved to replace a failing drive in a redundant array. In the event of drive failure, the hot spare replaces the failed drive and the array is rebuilt. 1-6