Adaptec 2410SA User Guide - Page 23
Installing the Controller, Overview
UPC - 760884142103
View all Adaptec 2410SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2 Installing the Controller In this Chapter... Overview 2-1 Installing the Controller 2-2 Checking Your Controller and Devices 2-3 Determining the Boot Controller 2-3 Overview To install the controller and drives, all you need is up to four of each of the following: I Serial ATA hard disk drives I Serial ATA cables (supplied in this kit) Configuration of Serial ATA devices is simple for the following reasons: I There are no jumpers or switches to set on the controller or hard drives. I The interface cable ends are identical, so you don't need to worry about which end to attach to the controller and which end to the drive. I All interface connectors are keyed so that you can insert them in only one direction. 2-1
2-1
2
Installing the Controller
In this Chapter...
Overview
To install the controller and drives, all you need is up to four of
each of the following:
■
Serial ATA hard disk drives
■
Serial ATA cables (supplied in this kit)
Configuration of Serial ATA devices is simple for the following
reasons:
■
There are no jumpers or switches to set on the controller or hard
drives.
■
The interface cable ends are identical, so you don’t need to
worry about which end to attach to the controller and which
end to the drive.
■
All interface connectors are keyed so that you can insert them in
only one direction.
Overview
2-1
Installing the Controller
2-2
Checking Your Controller and Devices
2-3
Determining the Boot Controller
2-3