Belkin F5D7231-4P User Manual - Page 14
Power Jack - GRAY, Connections to Computers LAN Ports - BLUE, Connection to Modem WAN Port - GREEN, - reset
UPC - 722868525173
View all Belkin F5D7231-4P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Knowing Your Router (6) (7) (8) (9)(10) 6. Power Jack - GRAY Connect the included 5V DC power supply to this jack. 7. Connections to Computers (LAN Ports) - BLUE Connect your wired (non-wireless) computers to these ports. These ports are RJ45, 10/100 auto-negotiation, auto-uplinking ports for standard UTP category 5 or 6 Ethernet cable. The ports are labeled 1 through 4. These ports correspond to the numbered LEDs on the front of the Router. 8. Connection to Modem (WAN Port) - GREEN This port is for connection to your cable or DSL modem. Use the cable that was provided with the modem to connect the modem to this port. Use of a cable other than the cable supplied with the cable modem may not work properly. 9. Reset Button The Reset button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Router's normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the Reset button. Use the restore option in instances where you may have forgotten your custom password. a. Resetting the Router Push and release the Reset button. The lights on the Router will momentarily flash. The Power/Ready light will begin to blink. When the Power/Ready light becomes solid again, the reset is complete. 12