Brother International AIRFLOW 3000 Operation Manual - Page 19

Preparation before threading the needles

Get Brother International AIRFLOW 3000 PDF manuals and user guides View all Brother International AIRFLOW 3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

English Using spun thread CAUTION Turn off the machine. IMPORTANT - Do not press the air threading pushbutton while threading with the sewing thread, otherwise the machine may be damaged. 1. Use the air threading to thread the looper with spun thread. 2. Cut the spun thread 20 to 30 cm (8 to 12 inches) from the looper thread insertion hole 1. Preparation before threading the needles CAUTION For safety, turn off the machine before threading. 1. Raise the presser foot lifting lever to raise the presser foot.  3. Thread the machine with the sewing thread up to the looper thread insertion hole. 4. Tie the sewing thread to the spun thread 2.  2. Turn the handwheel so that the mark on the handwheel is aligned with the line on the machine . $! %! NOTE: When threading the needles after threading the loopers, the handwheel does not need to be turned since the mark on the handwheel and the line on the machine have already been aligned. If the machine has been turned on, turn it off. 5. Pull the spun thread coming out of the hole at the end of the looper until enough sewing thread has come out 3.  17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
17
English
Using spun thread
CAUTION
Turn off the machine.
IMPORTANT
-
Do not press the air threading pushbutton while
threading with the sewing thread, otherwise the
machine may be damaged.
1.
Use the air threading to thread the looper with
spun thread.
2.
Cut the spun thread 20 to 30 cm (8 to 12
inches) from the looper thread insertion hole
1
.
±
3. Thread the machine with the sewing thread up
to the looper thread insertion hole.
4. Tie the sewing thread to the spun thread
2
.
²
5.
Pull the spun thread coming out of the hole
at the end of the looper until enough sewing
thread has come out
3
.
³
Preparation before threading the needles
CAUTION
For safety, turn off the machine before threading.
1.
Raise the presser foot lifting lever to raise the
presser foot.
2.
Turn the handwheel so that the mark on the
handwheel <A> is aligned with the line on the
machine <B>.
´%!
´$!
NOTE:
When threading the needles after threading the
loopers, the handwheel does not need to be
turned since the mark on the handwheel and the
line on the machine have already been aligned.
If the machine has been turned on, turn it off.