Brother International AIRFLOW 3000 Operation Manual - Page 37
Gathering foot
View all Brother International AIRFLOW 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
/* English Gathering foot Features You can create beautiful gathers using the gathering foot on various garment and home decorating applications. Preparation Attach the gathering foot (see "CHAPTER 1 Removing/Attaching the presser foot"). Machine setting (type of stitch): - Two needle 4 thread overlock stitch - One needle 3 thread overlock stitch (Either needle can be used.) How to set fabric Test-sewing 1. Set the stitch length to 3 mm. 2. Set the differential feed ratio to 2. 3. Set the stitch width to 5 mm. 4. Adjust the other settings to those used during default overlock sewing. 5. Sew while keeping the fabric aligned with the guide 3. - Adjust the size of the gathers by setting the sitich length between 2 mm and 5 mm. - Adjust the amount of fabric that is gathered by setting the differential feed ratio between 1.0 and 2.0. NOTE: Do not pull or stretch the fabric during sewing. 1 Surface 2 Reverse 3 Guide 1. Raise the presser foot lifting lever. 2. Turn the handwheel so that the mark on the handwheel is aligned to the line on the machine (see "CHAPTER 1 Turning direction of the handwheel"). 3. Position the bottom piece of fabric (the fabric that will be gathered 1 under the guide 3 just below the needle). 4. Position the top piece of fabric 2 between the gathering foot and the guide 3 on top of the bottom fabric 1. 5. Lower the presser foot lifting lever. 35