Brother International AIRFLOW 3000 Operation Manual - Page 28
Releasing the two-thread-switching plate
View all Brother International AIRFLOW 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
3. Set the two-thread-switching plate. Move part of the two-thread-switching plate in the direction of the arrow to insert its tip into the eye at the end of the upper looper from behind. Chart of two-thread overlock stitch Stitch style Reverse (! NOTE: Make sure that the tip is in the eye of the upper looper 1. Releasing the two-thread-switching plate 1. Push area of the two-thread-switching plate to the back to remove the tip from the eye at the end of the upper looper, and then move it in the direction of the arrow. Stitch length Stitch width Stitch finger Thread tension Left needle thread Lower looper thread Right needle thread Lower looper thread Surface 3 5 - 7.5 Raised For fine For medium materials materials 2 (1 - 3) 2 (1 - 3) 6 (5 - 7) 6 (5 - 7) 2 (1 - 3) 2 (1 - 3) 6 (5 - 7) 6 (5 - 7) NOTE: For details on these operations, watch the video. https://s.brother/cvtkb/ $! 2. Close the front cover . Closing the front cover also closes the knife cover . &! %! 26