Brother International LK3-B432E MKII Instruction Manual - English - Page 27
. Operating procedure, Press the DISPLAY SET
View all Brother International LK3-B432E MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
5 . OPERATION 5-2 . Operating procedure Preparation Turn on the power switch. (The POWER indicator q will illuminate and the program number will flash in the display window !4.) Factory Variable range default B430E MarkII B431E MarkII B432E MarkII B433E MarkII Program No. 0 *1 1- 33 1- 6 1- 3 100 - *2 X-scale (%) 100 20 - 200 Y-scale (%) 100 20- 200 Speed (rpm) 2,000 1,000- 2,700 1,000-2,500 5-2-1 . Setting the program number *1 For checking the origin points for X and Y feed *2 Custom-made program Determine the appropriate program from the program list which is given on pp. 3 - 5. 1 Press the SELECT switch y until the PROGRAM NO. indicator illuminates. P PROGRAM NO. X-SCALE y Y-SCALE 2 Press the DISPLAY SET switches !2 until the desired program number is flashing in the display window. 3 Depress the foot switch to the second step. * The display will stop flashing and illuminates steadily, and the feed mechanism will move to the sewing start position. 1st step 2nd step SPEED COUNTER SELECT This completes the setting of the !2 program number. 5-2-2 . Setting the X-scale and Y-scale 1 Press the SELECT switch y until the X-scale or Y-scale indicator illuminates. P PROGRAM NO. 2 Press the DISPLAY SET switches !2 until the desired scale setting is flashing in the display window. (The setting is displayed as a per- centage.) X-SCALE y Y-SCALE SPEED !2 COUNTER SELECT 3 Depress the foot switch to the second step. * The display will stop flashing and illuminates steadily, and the feed mechanism will move to the sewing start position. 1st step 2nd step This completes the setting of the Xscale or Y-scale. 5-2-3 . Setting the sewing speed 1 Press the SELECT switch y until the SPEED indicator illuminates. P PROGRAM NO. X-SCALE y Y-SCALE SPEED COUNTER SELECT 2 Press the DISPLAY SET switches !2 until the desired speed setting is flashing in the display window. NOTE: Be sure to check the sewing pattern (refer to page 22) after setting has been completed to make sure that the needle hole does not go out of the area circumscribed by the work clamp. !2 21 LK3-B430E-, B431E-, B432E-, B433E- Mark II