Brother International LK3-B432E MKII Instruction Manual - English - Page 28
CHECKING THE SEWING PATTERN, When DIP switch 7 is
View all Brother International LK3-B432E MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
6. CHECKING THE SEWING PATTERN s When checking by operating only the feed mechanism 6. CHECKING THE SEWING PATTERN 1. Turn on the power switch. (The POWER indicator will illuminate and the program number will flash in the display window.) 2. Press the TEST switch. (The TEST indicator will illuminate.) TEST 3. Depress the foot switch to the second step. Only the feed mechanism will move. 1st step 2nd step [Check that the needle hole q does not protrude past the frame of the work clamp w.] * If you depress the foot switch again and keep it depresses after the feed mechanism has started to q move, the feeding speed will increase. * If you would like to stop the feed while it is moving, press the TEST switch. w 4. Press the TEST switch. (The TEST indicator will switch off and the test mode will be cleared.) TEST 5. Depress the foot switch. The work clamp will rise and the preparation for sewing will be completed. To ensure safety during use ...... You can prevent accidental changes being made to programs by setting DIP switches 7 and 8 to ON. When DIP switch 7 is ON ... The sewing pattern cannot be enlarged. When DIP switch 8 is ON ... The program number cannot be changed. LK3-B430E-, B431E-, B432E-, B433E- Mark II 22