Brother International LK3-B432E MKII Instruction Manual - English - Page 57
Using a cycle sewing program
View all Brother International LK3-B432E MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
13. CHANGING SPECIAL FUNCTIONS USING THE MEMORY SWITCHES Using a cycle sewing program 1. When "c1-1" is flashing in the display window !0, press the foot switch to the second step. 2. Start sewing. 3. "c1-1", "c1-2", "c1-3" are sewn in order for each article, and when the last-recorded pattern has been sewn, the display returns to "c1-1". * If you press one of the DISPLAY SET switches !1 when "c1-*" is displayed, you can return to the previous stitch pattern or skip a stitch pattern. * If you press the SELECT switch e when "c1-*" is displayed, you can check the contents of the recorded user program. Clearing a cycle sewing program 1. Switch the machine to recording mode by the procedure in step 3. of recording a user program. 2. Use one of the P* switches (user program switches) to specify which cycle sewing program to clear. * Press the P1 switch o if you would like to clear cycle sewing program No. 1. ("Pc 1" will be displayed.) 3. Press the RESET switch !2. * The recorded contents of the specified cycle sewing program will then be cleared. * If you press and hold the RESET switch !2 until after the buzzer has sounded twice, all cycle sewing programs will be cleared. NOTE: If you clear a user program after any cycle sewing programs have been recorded, all recorded cycle sewing programs will also be cleared. 51 LK3-B430E-, B431E-, B432E-, B433E- Mark II