Brother International LK3-B432E MKII Instruction Manual - English - Page 37
. Draining the oil, 9-4 . Cleaning the control box air inlet port, 9-5 . Cleaning the eye guard
View all Brother International LK3-B432E MKII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
9 . MAINTENANCE AND INSPECTION 9-3 . Draining the oil 1. Remove and empty the waste oil container q whenever it is full. 2. After emptying the waste oil container q, screw it back into its original position. q 9-4 . Cleaning the control box air inlet port w q Use a vacuum cleaner to clean the filter in the air inlet port w of the control box q at least once a month. * If the machine is used while the air inlet port is blocked, the inside of the control box will overheat. When this happens, the overheating error code ("Ed0") will be displayed and you will not be able to operate the sewing machine. 9-5 . Cleaning the eye guard Wipe the eye guard clean with a soft cloth. NOTE: Do not use solvents such as kerosene or thinner to clean the eye guard. 9-6 . Checking the needle Always check that the tip of the needle is not broken and also the needle is not bent before starting sewing. 31 LK3-B430E-, B431E-, B432E-, B433E- Mark II