Brother International MD-817 Service Manual - Page 25
Sewing, machine
View all Brother International MD-817 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Explanation DIP switch DIPC & DIPD of Mark II DIPC 1 Sewing machine ON speci₹ication (change on and off OFF timming of reverse solenoid at back- ON 2 tack) OFF Delay time from ON 3 presser down to * start OFF ON 4 Slowdown control OFF Continuous backta- ON 5 ck selection OFF ABCD+10 continuous ON 6 backtack OFF End backtack ON 7 control OFF Soft drop of ON 8 presser foot l ifter OFF B 8 42 OFF ON OFF ON 8845 8875 B737 B79I B774 (03) (00) (01) (02) OFF OFF ON ON There is delay time at start none Normal ly slowdown (usual slowdown) Fix time of inching period on slowdown A.B sewn repeatedly D times A. 11,C.0 10 stitches added to the display A.B,C,D Seam A.B.C.0 sewn as displayed Don't slow down to low speed on starting end B.T. Slow down to low speed on starting end B.T. There is soft drop of presser foot l ifter none DIPD 1 Mode selection ON Parameter setting mode OFF Normal ly sewing mode Half stitch 2 correction ON Forward one stitch cor. /Forward half stitch cor. OFF Forward one stitch cor. /none Backward 3 correction ON Forward one stitch cor. /Backward one stitch cor. OFF Forward one stitch cor. //none Optional output ON 4 y (1-2 pin of sewin- OFF g machine connect - tor 12P) ON 5 OFF Dependence on DIPD-5 Output for tension release of standard 3 position Output for pul ler Output for needle cooler or vacuum pump Sewing direction ON Stopped as reverse direction at finished B 6 at finished and s- topped start B.T. OFF Stopped as normal ly direction at finished B 8+1 start B.T. or ON 1 stitch added to the displayed B seam length 7 continuous B. T. OFF Seam B sewn as displayed 8 D+1 end backtack ON 1 stitch added to the displayed D seam length OFF Seam D sewn as displayed Note : DIPD-5 is activated when DIPB-2 is set to OFF. Note : Functions indicated with a mark are activated on the new CPU version ( J01520-8 mask no. 128 ). Note : A phrase on the left of "//" indicates that toggle switch SW2 should be set to ON and if a phrase is on the right then it should be set to OFF. - 21 -