Brother International MD-817 Service Manual - Page 59
continuity test
View all Brother International MD-817 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
El Connector related • Fuse failure (#2, #3-7) • LED 1 illumination (#3) • LED 1 flashing (#5) Thread trimmer connector CN3 O g I I I I I I I ,0 Presser foot connector / Brake connector LED 1 (#3) O CD CN8 CN5 CN7 CN4 CN10 0 \ 0 0 8A fuse CN6 O Power-supply connector Motor connector,-- cocci 000 000 0 a 0 a Fuses PTR, D: OK #1 0. TRM check methods 1. Remove the three M5 screws 0 and four M4 screws 2. Set the tester to the X 152 range (0 ohm adjustment). 3. PTR continuity test Between TRM C (orange wire) and CE (violet wire). Should not be 0 ohms in both directions. 4. D continuity test Between CE (violet wire) and E (brown wire). Should not be 0 ohms in both directions. B: White wire C: Oragne wire -00 E: Brown wire CE: Violet wire Note: If the TRM is damaged, replace the frame assembly of the motor used together with the control box. (The motor torque becomes weak and all rotation speeds become higher.) - 55 -