Brother International MD-817 Service Manual - Page 30
Parameter, setting
View all Brother International MD-817 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
10 Parameter setting Start Set DIPD-1 to ON. • Turn off all LEDs. (When using 100 specification panel, display pattern 1.) • Stop thread trimming. • Press the thread trimming key two times quickly. (LED on the th ead trimming key blinks and parameter No. appears below A and B.) • Select paramete number using the A and 0 keys below B. Change or end? END 'Change Press the thread trimming key. (Data corresponding to parameter number set will blink.) P • Change number using the A and keys below A and B. C) Data correspondig parameter number can be checked only while press- : ing the A key below A. L X2 When the parameter number is related to backtacking, press the A key to show its pulse number on the display; press the 77 key to show symbol. Changing completed? No more changes Further changes • Parameter No. 99 appears. • Parameter No. 90 appears. Is parameter number related to backtacking? Yes • Press the thread trimming key. (The number will blink.) • Change the number using the A key below B. C) • Press the thread trimming key. (The display returns to the parameter number.) • Press the thread trimming key. End Xt Press the key two times with a one second interval between; if the interval is too short or too long, the machine will not receive your indication. C): When the parameter number is related to backtacking, it shows the pulse number. C): Select the pulse number along with a plus or minus symbol. On the screen, plus is shown as 0, minus symbol is shown as 1. - 26 -