Brother International MD-817 Service Manual - Page 34
timing, chart
View all Brother International MD-817 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
NBN timing chart A. Thread trimming timing when SW 3 is set to ON ( when thread nipper function is activated ) Depressing treadle backward Needle down position signal Needle up position signal Pitch condense solenoid Thread trimming solenoid Tension release solenoid Brake solenoid Thread release solenoid Thread nipper solenoid Presser foot l ifter solenoid T24 1 40msec. T20 T21 T22 T11 : 113 : 2O0Hz T14 1-. B . Tread trimming timing when SW 3 is set to OFF ( when thread nipper function is deactivated ) Presser foot l itter solenoid Thread release solenoid OFF Thread nipper solenoid OFF 112 T13 : 2O0Hz T14 C. Sewing start timing after thread trimming Depressing treadle forward Needle down position signal Needle up posit ion signal Tension release solenoid n pulse Thread release solenoid m pulse >K. Inching speed area 123 , Slow speed area ( 2 stitches ) n pulse : This is set by DIPC1 and 2. There are 4 kinds of numbers. ( 0, 10, 20. 30 ) m pulse : This is set on the operation panel. Zero to nine pulses can be set; the default is 2. Slow speed aera : This is set to on the operation panel. Zero to nine stitches can be set; the default is 3. ( Al l signals are activated when they are in the low position. )) -30-