Brother International MD-817 Service Manual - Page 31
Parameter, timing
View all Brother International MD-817 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
E Parameter and timing list 1. MK II specification Parameter No. 00 Default 00 Data setting range 00 - 03 Function The specifications of the machine head can be only temporarily changed. (Restoration to original state is made by DIPC 1 and 2.) 00: B737 etc. 01: B791 02: B774 03: B842 group 10 (T10) 11 (T11) 15 00 - 25 (x10) (150 msec.) (0 - 250 msec.) 04 03 - 10 (x10) (40 msec.) (30 - 100 msec.) The motor can be delayed when the machine is started with the automatic presser foot lifter raised. There is a delay from the time the thread wiper is turned OFF to the time the automatic presser foot lifter is turned ON after thread trimming. 13 (T13) 14 (T14) 30 (300 msec.) 36 (3 minutes) 10 - 90 (x10) (100 - 900 msec.) 00 -60 (x5) (5 seconds - 5 minutes) The automatic presser foot lifter is turned ON. The presser foot will be automatically turned OFF after the set time passes. When the data is set to 00, the presser foot is not automatically turned OFF. 15 * 12 00 - 40 (x2.5) (T15) (30 msec.) (0 - 100 msec.) There is a delay from presser foot lifter is turned OFF to presser foot lifter is turned ON for moment. (Soft drop function) 16 * 06 00 - 40 (x2.5) (T16) (15 msec.) (0 - 100 msec.) ON time of presser foot lifter after above delay T15. (Soft drop function) 20 (T20) 02 01 - 07 (x10) (20 msec.) (10 - 70 msec.) There is a delay from the time the thread trimmer stops to the time the thread wiper is turned OFF. 21 (T21) 05 04 -10 (x10) (50 msec.) (40 - 100 msec.) ON time of thread wiper 30 00 -23 - +23 (1 pulse unit) (0 pulses) (1: minus, 0: plus) Turning ON time of quick + symbol delays the timing reverse device upon start corresponding to the pulse and end backtacking. number you previously set. 31 00 -23 - +23 (1 pulse unit) (0 pulses) (1: minus, 0: plus) Turning OFF time of quick reverse device upon start and end backtacking. - symbol advances the timing corresponding to the pulse number you previously set. 32 00 -23 - +23 (1 pulse unit) (0 pulses) (1: minus, 0: plus) Turning OFF time of quick reverse device upon end backtacking 33 00 -23 - +23 (1 pulse unit) (0 pulses) (1: minus, 0: plus) The second turning ON time of quick reverse device for end backtacking when DIPA5 is set to ON. The parameter numbers appear on the panel. ( ) shows the number in the timing chart. Note: Functions indicated with a * mark are activated on the new CPU version (J01520-B mask no. 128). - 27 -