Brother International MD-817 Service Manual - Page 35
automatically
View all Brother International MD-817 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3. BAST specification Parameter No. 11 (T11) Default Data setting range 04 03 -- 10 (x10) (40 msec.) (30 - 100 msec.) 13 (T13) 14 (T14) 30 (300 msec.) 36 (3 minutes) 10 -90 (x10) (100 - 900 msec.) 00 - 60 (x5) . (5 seconds - 5 minutes) 20 (T20) 02 01 -07 (x10) (20 msec.) (10 - 70 msec.) 21 (T21) 05 04 -10 (x10) (50 msec.) (40 - 100 msec.) The parameter numbers appear on the panel. ( ) shows the number in the timing chart. Function There is a delay from the time the thread wiper is turned OFF to the time the automatic presser foot lifter is turned ON after thread trimming. ON time of automatic presser foot lifter The presser foot will be automatically turned OFF after the set time elapses. When the data is set to 00, the presser foot is not automatically turned OFF. There is a delay from the time the thread trimmer stops to the time the thread wiper is turned ON. ON time of thread wiper - 31 -