Brother International MD-817 Service Manual - Page 33
continuous
View all Brother International MD-817 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
2. NBN specification Parameter No. 10 (T10) 11 (T11) Default Data setting range 15 00 - 25 (x10) (150 msec.) (0 - 250 msec.) 10 05 - 25 (x10) (100 msec.) (50 - 250 msec.) 12 (T12) 06 05 - 25 (x10) (60 msec.) (50 - 250 msec.) 13 (T13) 14 (T14) 30 10 - 90 (x10) (300 msec.) (100 - 900 msec.) 36 00 - 60 (x5) (3 minutes) (5 seconds - 5 minutes) 20 (T20) 21 (T21) 22 (722) 23 (T23) 24 (724) 04 00 - 15 (x10) (40 msec.) (0 - 150 msec.) 06 04 -15 (x10) (60 msec.) (40 - 150 msec.) 06 04 -15 (x10) (60 msec.) (40 - 150 msec.) 15 04 - 20 (x10) (150 msec.) (40 - 200 msec.) 04 00 - 15 (x10) (40 msec.) (0 - 150 msec.) 30 00 -23 - +23 (1 pulse unit) (0 pulses) (1: minus, 0: plus) 31 00 -23 - +23 (1 pulse unit) (0 pulses) (1: minus, 0: plus) 32 00 -23 - +23 (1 pulse unit) (0 pulses) (1: minus, 0: plus) 33 00 -23 - +23 (1 pulse unit) (0 pulses) (1: minus, 0: plus) The parameter numbers appear on the panel. ( ) shows the number in the timing chart. Function The motor can be delayed when the machine is started with the automatic presser foot lifter raised. There is a delay from the time the thread nipper is turned OFF to the time the presser foot lifter is turned ON when toggle switch SW3 is set to ON and the thread nipper function is activated. There is a delay from the time the thread trimmer is turned OFF to the time the presser foot lifter is turned ON when toggle switch SW3 is set to OFF and the thread nipper function is deactivated. ON time of automatic presser foor lifter The presser foot will be automatically turned OFF after the set time passes. When the data is set to 00, the presser foot is not automatically turned OFF. There is a delay from the time the thread trimmer stops to the time the thread wiper is turned ON. ON time of thread release solenoid ON time of thread nipper solenoid ON time of thread release solenoid at sewing start after thread trimming Time of thread release solenoid from the time thread trimming is completed to the time the thread release solenoid is turned OFF. Turning ON time of quick reverse device upon start and continuous backtackings. + symbol delays the timing corresponding to the pulse number you previously set. Turning OFF time of quick reverse device upon start and continuous backtackings. - symbol advances the timing corresponding to the pulse number you previously set. Turning OFF time of quick reverse device upon end backtacking Turning ON time of quick reverse device upon end backtacking - 29 -