Brother International MD-817 Service Manual - Page 57
Brother International MD-817 Manual
View all Brother International MD-817 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Caution (p.63) 1. Connect all connectors except the operation box. 2. Three printed-circuit board switches: needle position switch: lower; correction switch: OFF; slow-start switch: OFF. 3. Turn the high-speed VR fully counterclockwise. Related Connectors (p.55) Wiper operation with power ON. Thread trimmer operation with power ON. Reverser operation with power ON. Brake ON with power ON. Motor roars or hums dur- I vi.. ing forward backtack. LED blinking during forward backtack. I Abnormal high speed while depressed forward. Pedal one-stitch sewing difficult. Sometimes not thread trimming. Deviation of needle (low- V er) and needle (upper) stopping. High speed OK, but no low speed. Pedal low-speed range is limited. Power ON. Motor starts. NO Wiper operates. #100 NO YES YES Return to "START" (p.52) #100-1 (p.64) Thread trimmer operates. #101 NO Reverse operates. #102 NO YES YES #101-1 (p.64) #102-1 (p.65) Brake sound NO #103 YES #103-1 (p.65) Machine pulley is light. NO #103 YES Treadle lever depressed forward. LED 1 blinks? NO Operation at high speed. #104 NO YES YES Operation at low speed. YES NO Have #3-#7 adjustments been made? Low-speed torque: OK NO YES #106 (p.66) YES Turn high-speed VR fully clockwise. .7 (P54) - 53 - Return to "START" (p.52) #104-1 (p.66) Return to "START" (p.52) NO D printed-circuit board check (p.58) #106-1 (p.66)