Brother International MD-817 Service Manual - Page 28
depressing
View all Brother International MD-817 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Explanation DIP switch of COV DIPA 1 Position of press- ON er after thread t- rimming OFF Down Raised Position of press- ON 2 er after thread t- rimming wi th trea- OFF dle in neutral po- sition Ra ised Down Position of press- ON 3 er when machine is stopped with trea- OFF dle at neutral Raised Down Automatical ly ON none 4 power off presser foot l ifter OFF The power turns off automatical ly after 3 minutes Delay time from p- ON 5 resser off to sta- rt OFF 250 msec 350 msec Slow start mode 6 ON Slow start mode ( 2 stitches ) OFF none Select folder 7 movement ON Alternate movement OFF Momentary movement Under thread trim ON 80 msec on 8 timming OFF 80 msec on, next 50 msec off, next 10 msec on DIPS 1 Reserved Normal ly OFF Number of condense ON 2 stitches OFF 10 stitches 5 stitches Correction number ON 3 of condense stitc- hes OFF Subtract 2 stitches from setting number (3 or 8) 5 or 10 stitches On timming of con- ON dense solenoid 4 OFF First needle up position signal after depressing the treadle backward. First needle down position signal after depressing the treadle backward. Delay time at sta- ON 5 rt with standing operation OFF none There is delay time at start with standing op. - 24 -