Brother International PC-3000 Users Manual - English - Page 16
Bobbin Winding / Bobbin Thread Setting - security system
View all Brother International PC-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
BOBBIN WINDING / BOBBIN THREAD SETTING Winding the bobbin and setting the bobbin thread CAUTION Be sure to use the specified bobbin (part code 136492-151). Using a different bobbin may result in injuries or damage. 3 2 4,9 5 6 7,8 1 3 1 2 3 1 2 1. Connect the machine to the power supply and turn on the main power. 2. Place the spool of thread on the spool pin. The thread end should come from the bottom front of the spool. The spool cap closest to the thread spool size should be used to hold the spool securely on the spool pin. 1 Spool cap 2 Spool 3 Spool pin * The spool cap should be pushed on as far as it will go. Note If using a fine thread such as cross wound thread, slightly separate the spool cap (small) from the spool of thread before using it. 1 Cross wound thread 2 Spool cap (small) 3 Gap 13