Brother International PC-3000 Users Manual - English - Page 42
Overcasting When Using The Optional Side Cutter - 08 c
View all Brother International PC-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
OVERCASTING (WHEN USING THE OPTIONAL SIDE CUTTER) 00 05 06 07 08 5 00: Normal sewing 05: Zigzag stitch 06: Thin and medium fabrics 07: Thick fabric 08: Thick and medium stretch fabrics By using the side cutter, you can do overcasting while cutting the fabric. 1. Push the "NEEDLE POSITION" button to raise the needle, and then turn off the power. 2. Raise the presser foot lever. 3. Unscrew screw on the presser foot holder and remove the presser foot holder. 5 6 1 2 3 5 6 4. Set the screw of the needle into the fork of the operating lever. 1 Screw of the needle 2 Operating lever 3 Notch * Make sure that the needle clamp screw is held firmly by the fork. 5. With the presser foot raised, align the presser foot holder screw hole directly with the notch in the side cutter, then insert the screw and lightly tighten it. Lower the presser foot lever and firmly tighten the screw. 39