Brother International PC-3000 Users Manual - English - Page 31
Sewing,
View all Brother International PC-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
1. SEWING TRIAL SEWING Sewing using a utility stitch 4 5 2 CHAPTER 2 CAUTION - Be aware of the needle at all times while sewing, and keep your hands away from all moving parts such as the 3 needle, balance wheel and thread take-up lever, otherwise an injury may result. - Do not pull or push the fabric too hard while sewing, otherwise injury may result. - Never use bent needles. Such needles can easily break, which 1 could result in injury. 1. Turn on the sewing machine. The straight stitch (left) is selected. 1 2 28 2. Place the fabric under the presser foot, then pull out about 5 cm (2") of the upper thread and pass it under the presser foot toward the rear of the machine. 1 Upper thread 2 5 cm (2") 3. While pressing down on the thread and the fabric with your left hand, turn the balance wheel with your right hand to move the needle to the sewing start position. 6 1 Thread * You can begin sewing without drawing up the bobbin thread.