Canon 45 MC ZR50 ZR45MC Instruction Manual - Page 144

? The PHOTO button doesn't work. • The memory card is not loaded E ( 104). • You are using an SD Memory Card and it is set for erasure prevention. Change the position of the protect switch. • The memory card is full. Erase images ( 114) or insert a new memory card. • You have reached the maximum file number. Set the file numbering to RESET through the menu ( 106) and insert a new memory card. • You are using an unformatted memory card. Format the card ( 126). ? The image cannot be erased. • The image is protected ( 113). • You are using an SD Memory Card and it is set for erasure prevention. Change the position of the protect switch. Additional Information Miscellaneous Problem ? The wireless controller doesn't work. ? The power indicator is flashing. ? The camcorder malfunctions. ? The DV cable is connected correctly, but there's nothing in the display. ? The camcorder becomes warm 144 during use. Cause and/or what to do about it • The remote sensor mode is set to OFFB in the menu ( 50). • The remote sensor modes of the wireless controller and the camcorder itself are different ( 50). • The batteries are dead or not inserted. • Check the screen displays ( 149). • External interference may cause the camcorders' microprocessor to malfunction temporarily. If random letters appear in the display or if normal operation is interrupted, remove and then replace the power source. • Remove the cable and then reconnect it or turn the power off and back on again. • This is not a malfunction.