Canon MultiPASS C755 Service Manual - Page 104
New SSSWs/parameters added to this model, When Not Output is selected
View all Canon MultiPASS C755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
MultiPASS C755 Chapter 3: Maintenance & Service 6.2.5 New SSSWs/parameters added to this model #1 SSSW (service soft switch setting) SW01 (service soft switch 01: error management) Bit Function 1 0 Service error code Output 1 Error dump list Output 2 Not used 3 Copy function No 4 (New) ##300 series service error code Output 5 Not used 6 Not used 7 User setting restriction Setting possible 0 Not output Not output Yes Not output Setting restricted [Bit 4] Even when Bit0 is set to "Not output", you can select whether or not to output ##300 series Service Error Codes, caused by hardware malfunction. When "Output" is selected, ##300 series Service Error Codes are displayed and in reports. When "Not Output" is selected, no Service Error Codes are displayed. SW28 (service soft switch 28: V.8/ V.34 protocol settings) Bit Function 1 0 (New) Caller V.8 protocol NO 1 (New) Called party V.8 protocol NO 2 (New) Caller V.8 protocol late start NO 3 (New) Called party V.8 protocol late start NO 4 (New) V.34 reception fallback Prohibited 5 Not used 6 Not used 7 Not used 0 YES YES YES YES Not prohibited [Bit 0] Select whether to use the V.8 protocol when calling. If NO is selected, the V.8 protocol is inhibited at calling and the V.21 protocol is used. [Bit 1] Select whether to use the V.8 protocol when called. If NO is selected, the V8 protocol is inhibited when called and the V.21 protocol is used. [Bit 2] If ANSam signal is not received during transmission (mainly manual transmission), select whether to use the V.8 protocol when the other fax machine declares the V.8 protocol in DIS signal. If NO is selected, the CI signal is not transmitted and the V.8 protocol is not used even if the DIS that specifies the V.8 protocol is received. 3-53